78% OFF AMBIENTILICIOUS Bundle by Audiofier

A WHOPPING 55GB COLLECTION!

get

78%
off

For just $79.00 (normally $354), get the Ambientilicious Bundle from Audiofier.

This bundle features 6 products in total. Three from Audiofier’s Ambient Series: AetherArp, Venkatt & Ekorain and 3 from the Randomisers family: Abstrung, Aerkord and Vesper.

These instruments are perfect for ambient, cinematic, generative and underscore music genres. In addition, they also spice up contemporary music with unusual textures and rich soundscapes.

This is a truly unique and limited time offer you should not miss, hurry and save!

Note: All products in this bundle require Kontakt full version 5.8.1 or higher

Value: $354.00
You Save: $275.00

Earn Rewards in The Shop

For every dollar you spend on this order, we’ll give you back 20% of that in store rewards credit that will be saved in your Rewards Wallet.

After completing your order, $15.80 will be instantly added to your Rewards Wallet which you can use for any product in The Shop.

78% OFF AMBIENTILICIOUS Bundle by Audiofier

A WHOPPING 55GB COLLECTION!

For just $79.00 (normally $354), get the Ambientilicious Bundle from Audiofier.

This bundle features 6 products in total. Three from Audiofier’s Ambient Series: AetherArp, Venkatt & Ekorain and 3 from the Randomisers family: Abstrung, Aerkord and Vesper.

These instruments are perfect for ambient, cinematic, generative and underscore music genres. In addition, they also spice up contemporary music with unusual textures and rich soundscapes.

This is a truly unique and limited time offer you should not miss, hurry and save!

Note: All products in this bundle require Kontakt full version 5.8.1 or higher

Value: $110.00
You Save: $88.00

Earn Rewards in The Shop

For every dollar you spend on this order, we’ll give you back 20% of that in store rewards credit that will be saved in your Rewards Wallet.

After completing your order, $15.80 will be instantly added to your Rewards Wallet which you can use for any product in The Shop.

get

78%
off

Overview: Products Included

PERFECT FOR AMBIENT, CINEMATIC, GENERATIVE & UNDERSCORE MUSIC GENRES!

ekorain

Ekorain generates ornaments and spurious notes that complement your melodies. The speed and occurrence of these EKOS can be controlled via CC so that it can sound like a choir of gentle raindrops, or a flood of musical beauty.

Read more

At the heart of Ekorain there are 2 Sound Sources Layers which will perform the generated EKOS. The sounds have been sampled mainly from acoustic instruments but also from analog/digital Synths which have been specifically selected in order to beautifully marry the more organic recordings.

Ekorain also includes a third layer which offers pad types of sound sources, which will complement the generated Ekos in specific music situations in which a thicker sound is required. Movement can be applied to the Pad Layer by turning on the Pad Step Volume, which includes Sequence presets and can also be randomised.

All Ekorain’s generated notes can be captured and exported via Midi Drag & Drop so you can use them with a different instrument on a different track.

What’s in there?

  • 95 Sound Sources in 5 categories:
  • Organic, Physical Medeling, Granular, Analog Synth, Effected 35 Pads Sound sources
  • 100+ Snapshots
  • Ekos generation
  • Arpeggiator
  • Scale Manager with 4 Scales Key Switches
  • Pad Layer
  • Step Volume Fx
  • Sound Randomiser with Undo/Redo
  • Midi Drag & Drop of Generated midi notes
  • Convolver with unique IRs
  • Pitch Envelope with several behaviours
  • Random Panner
  • Pad Freeze effect of last notes performed
  • Requires Kontakt full version 5.8.1

Close

$59.00 Value

AETHERARP

Ambient & Cinematic Soundscapes Generator – a 4 Sound Engines and Cloud Arpeggiator library for Kontakt 5.8.1 which creates evolving soundscapes, overtime mutating sounds, and ethereal/out-worldly moods that add movement and unpredictability to your ambient productions and film-scores.

Read more

All the parameters of this unique arpeggiator can be randomised, generating unpredictable sound evolutions. AetherArp makes it incredibly easy to create new sounds quickly and makes presets redundant. Sounds and Cloud Arpeggiator’s parameters can be all randomised generating new exciting sounds combinations every time.

AetherArp sound sources are multi-samples of organic instruments an analog synths, but you will never hear them in their “dry” state as the 200+ Impulse Responses will always process all samples rendering them un-recognisable and unique in your sounds arsenal.

What’s in there?

  • 2 Main Sound Layers, plus 2 Shimmer Layers
  • 30 multisampled sound sources for each layer
  • 150+ Snasphots Presets
  • Endless sound combinations
  • Evolving, unpredictable soundscapes
  • Cloud Arpeggiator with Randomisable Parameters
  • Random generation of New Sounds and Cloud Arpeggiations
  • Undo of Last Randomisation
  • 4 Convolvers with 200+ Impulses Responses in 10 categories
  • Pre and Post Convolver
  • Distortion Effects, Chorus effect
  • Master Delay and Reverb
  • Requires Kontakt full version 5.8.1

Close

$59.00 Value

venkatt

Venkatt – Ambient Machine offers 4 sound layers with unique features: The Attack layer includes only Transient sounds.

The Sustain Layer includes only sounds without attack. When you combine this two, you are actually combining two different instruments characters and creating a brand new instrument. Imagine a sound with the attack of a zither and the body of a voice.

Read more

Couple this with 20 reverse sounds and 20 sequenced sounds from the Reverse and Rhythmic layers and you have rich, evolving, unique patches at your disposal. All 20 sounds per layer can be selected and played at once! Layer 4 offers a sequencer with special features.

The dry and Wet sound of the Convolver effect will be controlled by Venkatt to create interesting rhythmic sound changes. The Sequence can be set to Loop mode, to continue until the key is pressed, or to NoLoop mode, to play only once and achieve creative repetitions effects.
What’s in there?

  • 4 Main Sound Layers.20 multisampled sound sources for each layer, playable at once
  • 200+ Snasphots Presets
  • Around 2Gb (Compressed NCW)
  • Endless sound combinations
  • Evolving, unpredictable soundscapes, pads, sequences and melodic sounds
  • Sequencer for Layer 4 with Vari Conv and Variations Octave features
  • Random generation of New Sounds and sequences with the “Create” function
  • Undo of Last “created” sound
  • 4 Convolvers with 200+ Impulses Responses
  • Eq, Chorus, Distortion, Widener, Rotor, Delay effects
  • Master Delay and Reverb
  • Requires Kontakt full version 5.8.1

Close

$59.00 Value

vesper

Vesper – Bells & Twinkly Things – includes a selection of Mallets, Bells, Metals among others. The different categories include organic real instruments, samples from digital and analog instruments, synthesised, designed and spacey sounds.

Read more

Randomisation Power
Audiofier’s new “intelligent” Randomiser feature makes it incredibly easy to create new sounds quickly and makes presets redundant. Sounds can be randomised fully, or within one or a blend of two of the 5 available sound categories. It also possible to recall past randomisations and go back and forth in the randomisation history, also recalling past randomisation on the fly.

Fully customisable
Create patches from scratch, with multiple ways of choosing sound sources, including a categorised Sound Browser, which works hand in hand with the randomisation engine to create sounds which are “just right”.

Arpeggiator fun
Arpeggiate short sounds or trigger sequences with the arpeggiator (yes you can!). Play sequencers and arpeggiator in serial or parallel with 2 different sounds.

What’s in there?

  • Generate special delay lines that can be pitched and harmonised in triads, fifths, suspended or random for a total inspiring sound creation! Filter, and blur the Crystals with the Cloud filter. Grains can be more or less pronounced to one’s taste. Finish them up with distortion, phaser and an additional delay.
  • On-the-Fly Reverse-able sounds
  • Two simultaneous step sequencers with 8 memory slots, changing sequence on the fly via key-switch.
  • Record your sequences by playing, not by drawing.
  • Generate random sequences and “improvise” temporary sequences at the tip of a “key switch”, to spice up some stale repetitive phrases.
  • Add movement and filtering to pads and sequences with four step sequence-able effects: Filter Cut off and Resonance, Distortion & Formant Filter
  • Add finishing touches to your sound with Convolution Reverb, two delays, Chorus, Shine, and Lo-Fi effects.
  • Arpeggiate short sounds or trigger sequences with the arpeggiator (yes you can!). Play sequencers and arpeggiator in serial or parallel with 2 different sounds.
  • Export your sequences as Midi
  • Dual Layer Arpeggiator, with ability to trigger Sequencers
  • 8 editable twin or single sequences per patch.
  • Permanent random sequences generation.
  • And so much more.
  • All require Kontakt full version 5.8.1

Close

$59.00 Value

aerkord

Aerkord – Bowed, Blown & Human Sustained Events – Includes a selection of bowed stringed instruments like Violin, Viola, Cello, Bass, but also bowed guitars and ethnic instruments , Woodwinds like Duduk, Kaval, Bamboo flutes, Ocarina and Gralla. Female voices. The different categories include natural instruments samples, granulised, ambient, designed and spacey sounds.

Read more

Aerkord Sounds Pool
Includes a selection of bowed stringed instruments like Violin, Viola, Cello, Bass, but also bowed guitars and ethnic intruments , Woodwinds like Duduk, Kaval, Bamboo flutes, Ocarina and Gralla. Female voices. The different categories include natural instruments samples, granulised, ambient, designed and spacey sounds.

Crystals Generator
Generate special delay lines that can be pitched and harmonised in triads, fifths, suspended or random for a total inspiring sound creation! Filter, and blur the Crystals with the Cloud filter. Grains can be more or less pronunced to one’s taste. Finish them up with distortion, phaser and an additional delay.

What’s in there?

  • Generate special delay lines that can be pitched and harmonised in triads, fifths, suspended or random for a total inspiring sound creation! Filter, and blur the Crystals with the Cloud filter. Grains can be more or less pronounced to one’s taste. Finish them up with distortion, phaser and an additional delay.
  • On-the-Fly Reverse-able sounds
  • Two simultaneous step sequencers with 8 memory slots, changing sequence on the fly via key-switch.
  • Record your sequences by playing, not by drawing.
  • Generate random sequences and “improvise” temporary sequences at the tip of a “key switch”, to spice up some stale repetitive phrases.
  • Add movement and filtering to pads and sequences with four step sequence-able effects: Filter Cut off and Resonance, Distortion & Formant Filter
  • Add finishing touches to your sound with Convolution Reverb, two delays, Chorus, Shine, and Lo-Fi effects.
  • Arpeggiate short sounds or trigger sequences with the arpeggiator (yes you can!). Play sequencers and arpeggiator in serial or parallel with 2 different sounds.
  • Export your sequences as Midi
  • Dual Layer Arpeggiator, with ability to trigger Sequencers
  • 8 editable twin or single sequences per patch.
  • Permanent random sequences generation.
  • And so much more.
  • All require Kontakt full version 5.8.1

Close

$59.00 Value

ABSTRUNG

Abstrung, all things strung: a selection of stringed instruments like GuZheng, Mandolin, Pipa, American Zither, Hammered Dulcimer, Kantele, Acoustic Guitars, Acoustic grand, upright and prepared pianos and Seagull instrument among others. The sound categories include organic real instruments samples, modelled, synthesised, designed and spacey sounds.

Read more

Abstrung Sounds Pool
Includes a selection of stringed instruments like GuZheng, Mandolin, Pipa, American Zither, Hammered Dulcimer, Kantele, Acoustic Guitars, Acoustic grand, upright and prepared pianos and Seagull instrument among others. The sound categories include organic real instruments samples, modeled, synthetised, designed and spacey sounds.

Split personality
Play one or both sound sources per zone with one or two sequencers running. Play pads and sequences at the same time or in split mode. Assign Crystals below or above the user defineable split point. And more…

Export your sequences as Midi
The Randomisers Series 1.2 includes a System page which gives acces to the Midi Drag & Drop feature. Generate sequences performances, export them on to you DAW and edit them or assign third parties sounds to them.

What’s in there?

  • Generate special delay lines that can be pitched and harmonised in triads, fifths, suspended or random for a total inspiring sound creation! Filter, and blur the Crystals with the Cloud filter. Grains can be more or less pronounced to one’s taste. Finish them up with distortion, phaser and an additional delay.
  • On-the-Fly Reverse-able sounds
  • Two simultaneous step sequencers with 8 memory slots, changing sequence on the fly via key-switch.
  • Record your sequences by playing, not by drawing.
  • Generate random sequences and “improvise” temporary sequences at the tip of a “key switch”, to spice up some stale repetitive phrases.
  • Add movement and filtering to pads and sequences with four step sequence-able effects: Filter Cut off and Resonance, Distortion & Formant Filter
  • Add finishing touches to your sound with Convolution Reverb, two delays, Chorus, Shine, and Lo-Fi effects.
  • Arpeggiate short sounds or trigger sequences with the arpeggiator (yes you can!). Play sequencers and arpeggiator in serial or parallel with 2 different sounds.
  • Export your sequences as Midi
  • Dual Layer Arpeggiator, with ability to trigger Sequencers
  • 8 editable twin or single sequences per patch.
  • Permanent random sequences generation.
  • And so much more.
  • All require Kontakt full version 5.8.1

Close

$59.00 Value

Media

IN THIS BUNDLE

  • Three members of the Randomisers family: Abstrung, Aerkord and Vesper.
  • Three members of Audiofier’s Ambient Series: AetherArp, Venkatt and Ekorain.
  • The Randomisers Series’ 1.2 engine features two multisample, 3 Round Robins Sound Sources, a Twin Step Sequencer, an Arpeggiator (and yes, they work in Tandem!), Step Effects, Trails Layer, a Sequence Midi Drag & Drop function, a Crystal Generator and the trademark intelligent Randomisation function which allows to generate fresh and useful sounds every time. It includes recordings of real, modelled, synthesised and designed instruments, resulting in an original palette of inspiring sounds for creators of electronic and organic music.
  • The Ambient Series is the most creative collection of instruments Audiofier has created. It stretches the imagination and provides sounds and engines which are not only unique, but produce sounds that are not found anywhere else.
  • At the click of a finger, these instruments will generate complex patches which to do from scratch would include very lengthy signal chains and lots of sound sources. With the Ambient Series instruments you can achieve this in a second and focus more on your music creation.
  • These instruments are perfect for Ambient, Cinematic, Generative, Underscore music genres, but also to spice up contemporary music with unusual textures and rich soundscapes.

kontakt-full

Offer Ends:

-46Days -16Hrs -50Min -47Sec

Don’t miss this amazing deal!

Hurry, this deal will expire soon!